Sinking Braided Line with PTFE Core: 4X+1, 8X+1 and 12X+1 Explained

Short answer: a sinking braid is a PE braid woven around a dense core, usually PTFE. PE alone floats, so the core is what makes the line sink. The “+1” in 4X+1, 8X+1 and 12X+1 is that core; the first number is how many PE strands are braided around it. The line sinks straight away, lies flat on the bottom and is hardly moved by wind or waves, which is why feeder and carp anglers use it as a main line and as a braided hooklink.
4X+1, 8X+1 and 12X+1
| Construction | Feel and surface | Best for |
|---|---|---|
| 4X+1 (4 PE strands + core) | Slightly rougher, very abrasion resistant, lowest cost | Hooklinks over gravel and mussels, budget main lines |
| 8X+1 (8 PE strands + core) | Round and smooth, quiet through the guides | Feeder main lines, method feeder, all-round carp |
| 12X+1 (12 PE strands + core) | Very round and supple, longest casts | Long-range feeder, premium ranges |
Why anglers choose sinking braid
- No bow in the line: the line sinks under the surface drift, so the feeder tip shows every bite and the rig is not dragged out of place.
- Low stretch: like any braid it stretches very little, so bites register at long range and the hook sets well.
- Lies on the bottom: carp are less likely to spook on a line that follows the lake bed than on a line rising through the water.
- Braided hooklinks: a soft sinking braid makes a supple hooklink that sits flat and lets the bait move naturally.
Typical sizes
| Use | Diameter | Breaking strain | Spool |
|---|---|---|---|
| Feeder main line | 0.10 to 0.16 mm | 6 to 12 kg (13 to 26 lb) | 150 m, 300 m |
| Carp main line | 0.18 to 0.28 mm | 12 to 25 kg (26 to 55 lb) | 300 m, 1,000 m |
| Braided hooklink | 0.20 to 0.35 mm | 15 to 35 lb | 10 m, 20 m |
Common colors are moss green, brown, camo and dark grey for the bottom, and fluo green or yellow for anglers who want to see the line above the water.

What to check before ordering
- Sink rate: drop a short length in a glass of water; it should sink at once and not hang on the surface.
- Real diameter and breaking strain: ask for test reports and measure samples. A label that claims a very high strength for a thin diameter is a warning sign.
- Core position: the core should stay centered when the line is cut, with no flat spots.
- Color fastness: rub a wet sample on white cloth; little color should come off.

FAQ
Is sinking braid the same as lead core?
No. Lead core has a lead wire inside and is very heavy; it is used for leaders and trolling. Sinking braid uses a lighter core such as PTFE, so it can be used as a full main line.
Can sinking braid be used for spinning?
It can, but most spinning anglers prefer floating braid for lures that work near the surface. Sinking braid is best when the rig sits on the bottom.
What is the MOQ for sinking braid with our label?
Usually from about 100 to 300 spools per size and color, depending on the spool and packaging. Samples are available before bulk production.
Related products
More on braid in general: how to choose PE braided fishing line.
Fishing line size converterPE number, lb test and diameter for braid, mono and fluorocarbon, with full size charts.Open the tool →More on this topic: Fishing line guide: braid, mono and fluorocarbon.